M600-4D 600 Watt Full-Range Class-D 4-Chanel Amplifier

The M600-4D is a 600 Watt 4-channel high efficiency Class-D marine amplifier designed to conform to UV and Salt-Fog protection standards. Amplifier features on-board Punch EQ, variable crossover and tri-state protection circuits.

  • 12dB/octave Butterworth crossover
  • 2/4 channel switch
  • 4 Gauge power/ground connectors
  • Cast aluminum heatsink
  • Top mounted controls
  • Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection.
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Tri-stage protection covers thermal, over-current and short circuits.
  • 1 Year Standard Warranty warranty info
Class-D
Full Range Class-D

M600-4D

The Prime M600-4D amplifier is a 600 Watt 4-channel high efficiency Class-D amplifier specifically designed for Marine and Powersport applications. The amplifier printed circuit board is conformal coated with a UV resistant finish that conforms to industry standard UV and Salt-Fog specifications, and the Class-D circuit topology is so efficient, it consumes much less current from your charging system over traditional Class-A/B amplifiers.


CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
P.O.W.E.R.

P.O.W.E.R.

Power supply and output design that allows the amplifier to increase power output as voltage...
Learn more
Class-D

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.
Learn more
Full Range Class-D

Full Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that...
Learn more
CEA-2006 Compliant: CEA-2006 Guidelines
Number of Channels: 4
Rated Power
(RMS Continuous Power):
100 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power):
600 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
Bridgeable: Yes
Efficiency (average): 80% @ 4-Ohm
75% @ 2-Ohm
Crossover Controls: Front Channels: Variable 50Hz - 500Hz @ 12dB/octave
Rear Channels: Variable 50Hz - 500Hz @ 12dB/octave
Tone Controls: 0dB to +18dB @ 45Hz
Signal Input: Low Level: 2 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 12 AWG
Heat Sink Type: Cast Aluminum
Cooling: Convection
Remote Controls: n/a
Visual Indicators: Power
Protect
Circuit Topology Class: Full Range Class-D
Frequency Response: 20Hz to 20kHz +/-1dB
Shipping Weight: 7.038 Lbs.
(3.19 Kg.)
Dimensions (HxWxL): 1.97" x 6.77" x 11.06"
(5cm x 17.20cm x 28.10cm)
Dimensional Diagram:

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the .

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the .

My Stuff
My Stuff

View status of current inquiry or review question history.

RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

read more...
RFI-20

20 Feet Twisted Pair Signal Cable
MSRP $15.99

read more...
RFD4

4 AWG Distribution Block
MSRP $21.99

read more...
RFC1

1 Farad Capacitor
MSRP $129.99

read more...

Recently Viewed Products