T2500-1bdCP 2500 Watt Class-bd Constant Power Amplifier

The Power T2500-1bdCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1bdCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.

  • 24dB/octave crossover
  • 1/0 AWG power/ground connectors
  • Audiophile grade speaker connections
  • Infrasonic filter
  • MOSFET power supply
  • MOSFET output stage
  • RCA pass-thru outputs
  • PowerSync - allows 2 amplifiers to be "strapped" together
  • MasterSync - allows 1 amplifier to control an array of amplifiers
  • 0°/180° Phase Switch
  • Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle
  • 2 Years Standard Warranty warranty info
  • Get a 1 Year Extended Warranty extended warranty info
Class-BD
Constant Power
MEHSA<sup>3</sup>

T2500-1bdCP

The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!


CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
Class-BD

Class-BD

Class-bd amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional...
Learn more
Constant Power

Constant Power

Constant Power is a patented circuit topology that provides instantaneous delivery of output power...
Learn more
Balanced Differential Inputs

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.
Learn more
DSM

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from...
Learn more
MEHSA<sup>3</sup>

MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs...
Learn more
Punch Bass EQ

Punch Bass EQ

Pioneered by Jim Fosgate in the early 70's, Punch Bass compensates for acoustical problems common...
Learn more
Rockford Fosgate Avatar

Rockford Fosgate Avatar

These Avatars are a personal signature from the Rockford Fosgate team member who designed and...
Learn more
TO-247 MOSFETs

TO-247 MOSFETs

(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more...
Learn more
CEA-2006 Compliant: CEA-2006 Power Rating
1500W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power):
1500 Watts x 1 @ 4-Ohm
2500 Watts x 1 @ 2-Ohm
2500 Watts x 1 @ 1-Ohm

Two amplifiers in bdSYNC:
5000 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power):
2500 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
1823 Watts x 1 @ 4-Ohm
2940 Watts x 1 @ 2-Ohm
2980 Watts x 1 @ 1-Ohm
Bridgeable: Yes
(two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier)
Frequency Response: 20Hz to 250Hz +/-0.5dB
Efficiency (average): 81.9% @ 4-Ohm
77.7% @ 2-Ohm
64.5% @ 1-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth
Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz
Tone Controls: Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: 1 RCA pair
Signal Output: 1 RCA pair
Power Input Connector: Block
Power Wire Gauge: 1/0 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 8 AWG to 16 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Remote PEQ
(overrides built-in Punch Bass)
Visual Indicators: Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Output -00dB to +2dB @ 11 steps (Blue LEDs)
Battery 9VDC to 16VDC @ 11 steps (Blue LEDs)
Circuit Topology Class: Class-BD
Operating Voltage: 9 -16 VDC
Recommended Fuse
(not included):
300 A
Max. Current Draw (13.8V Sinewave): 350 A
Average Current Draw (13.8V Music): 175 A
Suggested Alternator: 200 A
Shipping Weight: 21.7 Lbs. (9.84 Kg.)
Dimensions (HxWxL): 2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm)
Dimensional Diagram:

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the t2500-1bdcp.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the t2500-1bdcp.

My Stuff
My Stuff

View status of current inquiry or review question history.

PEQ

Remote Punch EQ
MSRP $30.99

read more...
PEQX3

Remote PEQ Controls up to 3 Amplifiers
MSRP $56.99

read more...
bdSYNC2

bdSYNC2 Cable
MSRP $22.99

read more...
RFC2D

2 Farad Hybrid Digital Capacitor
MSRP $269.99

read more...

ARE YOU ENGINEERED TO ROCK?

1-Year Extended Amplifier Warranty Icon Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit. We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit! Purchase a Rockford Fosgate Punch or Power amplifier. Add the correct amplifier installation kit. Get an additional 1 year amplifier warranty FREE!Download Instructions
RFK1

1/0 Power Installation Kit
USD 251.99

read more...
RFK1D

Dual Amp 1/0 AWG Dual Amp Wiring Kit
USD 333.99

read more...

Recently Viewed Products