P1000X5 1,000 Watt Class-BD 5-Channel Amplifier

The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.

High level input capable with Auto Turn-On circuit
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz.
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Infrasonic filter
2/4 channel switch
1 Year Standard Warranty

Find Dealer USD 699.99

Bright Idea

C.L.E.A.N. Set-Up

Remote Clip LED

Auto Turn-On

Overview
Technologies
Specifications
Support
Accessories
WiringWizard

P1000X5

The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

Updated: 2/26/2013

Downloads

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...

Learn more

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the...

Learn more

Class-BD

Class-bd amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional...

Learn more

TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing...

Learn more

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

Learn more

DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

Learn more

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from...

Learn more

MEHSA³

MEHSA³ reduces MOSFET temperatures, lowers distortion, increases durability and prolongs...

Learn more

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and...

Learn more

Rockford Fosgate Avatar

These Avatars are a personal signature from the Rockford Fosgate team member who designed and...

Learn more

C.L.E.A.N. Set-Up

Input/output clip LEDs allow matching a source unit to the amp and optimize the amp's output.

Learn more

CEA-2006 Compliant:

Number of Channels:

Rated Power
(RMS Continuous Power):

75 Watts x 4 +
200 Watts x 1 @ 4-Ohm

125 Watts x 4 +
400 Watts x 1 @ 2-Ohm

N/A +
500 Watts @ 1-Ohm

Total Power
(Sum of Rated Power):

1000 Watts RMS

Dynamic Power
(PVC/PowerCube® Measurement):

115 Watts x 4 +
299 Watts x 1 @ 4-Ohms 0° Res

190 Watts x 4 +
540 Watts x 1 @ 2-Ohms 0° Res

N/A +
863 Watts x 1 @ 1-Ohm 0° Res

Bridgeable:

Yes (front/rear channels)

Efficiency (average):

Front/Rear: 66% @ 4-Ohm
Sub Channel: 80% @ 4-Ohm

Crossover Controls:

Front: 50Hz - 250Hz High-Pass @ 12dB/Octave
Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave
Sub: 50Hz - 250Hz Low-Pass
Sub: 28Hz infrasonic filter @ 12dB/Octave

Tone Controls:

Sub:
0dB to +18dB @ 45Hz

Signal Input:

Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 3 RCA Pair
Sub: front/sub input switch

Signal Output:

n/a

Power Input Connector:

Block

Power Wire Gauge:

4 AWG

Speaker Output Connector:

Block

Speaker Wire Gauge:

12 AWG

Heat Sink Type:

Cast

Cooling:

Convection

Remote Controls:

Optional Punch Level Control (PLC2) Ready

Visual Indicators:

Power/Protect/Thermal LED
Input Clip LED
Output Clip LED

Circuit Topology Class:

Full Range Class-D

Frequency Response:

Front/Rear: 20Hz - 20kHz +/-3dB
Sub: 20Hz - 500Hz +/-3dB

Shipping Weight:

TBA Lbs.
(TBA Kg.)

Dimensions (HxWxL):

2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)

Dimensional Diagram:

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process

RFTECH Support

Find Answers

Search for answers regarding the .

Ask A Question

Submit a question to our RFTECH staff about the .

My Stuff

View status of current inquiry or review question history.

RFC1

1 Farad Capacitor
MSRP $129.99

PLC2

Remote Punch Level Control
MSRP $30.99

RFK4

4 AWG Power Installation Kit
MSRP $111.99

RFDB4

4 AWG Positive/Negative Battery Terminal
MSRP $17.99

RFI2SW

Speaker Line To Male RCA Adapter
MSRP $7.99

RFK4I

4 AWG Power & Signal Installation Kit
MSRP $129.99

RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

RFI-20

20 Feet Twisted Pair Signal Cable
MSRP $15.99

RFK4D

4 AWG Complete Installation Kit
MSRP $185.99

RFK1

1/0 Power Installation Kit
MSRP $251.99

RFK1D

Dual Amp 1/0 AWG Wiring Kit
MSRP $333.99

Woofer WiringWizard

The below woofer wiring diagrams are compatible with this amplifier and are designed to optimize power output. The diagrams were selected simply by choosing woofer configurations that match the amplifier's recommended speaker load. Care should be taken to select woofers with a total power rating that can safely handle the amplifier's RMS power output.