M1200-1D

Prime Marine 1,200 Watt Class-D Mono Amplifier

The M1200-1D is a 1200 Watt mono high efficiency Class-D marine amp featuring a Marine grade PC Board, on-board Punch EQ, infrasonic filter, variable crossover and tri-state protection circuits.

  • Marine grade two part epoxy coating on circuit boards
  • 12 dB/Oct Butterworth crossovers
  • Infrasonic filter
  • Remote PLC (Punch Level Control)
  • On-board Punch EQ with +18dB boost @ 45Hz
  • RCA pass-thru outputs
  • Real time output and power supply thermal sensing
  • Cast aluminum heat sink
  • Top mounted controls
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Short circuit protection
  • Muted turn on
  • 2 Years Standard Warranty warranty info
USD 499.99


Find Dealer

M1200-1D

The Prime M1200-1D amplifier is a 1200 Watt mono high efficiency Class-D amplifier specifically designed for Marine and Powersport applications. The amplifier features a Marine grade PC Board, and the Class-D circuit topology is so efficient, it consumes much less current from your charging system over traditional Class-A/B amplifiers.
Element Ready™ - Amps

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
Learn more
CEA-2006

CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
CE Compliant

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the...
Learn more
Class-D

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.
Learn more
CEA-2006 Compliant: CEA-2006 Power Rating
400W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power):
400 Watts x 1 @ 4-Ohm
800 Watts x 1 @ 2-Ohm
1200 Watts x 2 @ 1-Ohm
Total Power
(Sum of Rated Power):
1200 Watts RMS
Dynamic Power
(PVC/PowerCube®):
485 Watts x 1 @ 4-Ohm
854 Watts x 1 @ 2-Ohm
1256 Watts x 2 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/-1dB
Efficiency (average): 85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-Ohm
Crossover Controls: Variable 50Hz - 250Hz @ 12dB/octave
Tone Controls: 0dB to +18dB @ 45Hz
Signal Input: Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 12 AWG
Heat Sink Type: Cast Aluminum
Cooling: Convection
Remote Controls: Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators: Power
Protect
Circuit Topology Class: Class D
Shipping Weight: 7.825 Lbs.
(7.82 Kg.)
Dimensions (H x W x D): 1.97" x 6.77" x 11.06"
(5cm x 17.20cm x 28.10cm)
Dimensional Diagram:

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the m1200-1d.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the m1200-1d.

My Stuff
My Stuff

View status of current inquiry or review question history.

RFK4X
RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

read more...
RF-HLC
RF-HLC

2-Channel High-to-Low Converter
MSRP $19.99

read more...
RFC1
RFC1

1 Farad Capacitor
MSRP $129.99

read more...
Rockford FosgateWoofer WiringWizard



Available Wiring Diagrams


Please consult your amplifier owner's manual for lowest recommended impedance.

Wiring Diagram #1


Wiring Diagram #2


Wiring Diagram #3


Wiring Diagram #4


Wiring Diagram #5


Wiring Diagram #6


Wiring Diagram #7


Wiring Diagram #8


Wiring Diagram #9


Wiring Diagram #10


Speaker Polarity
Your woofer may use one of the following to identify (+/-) terminals.
Positive +
Red Post
Purple (4Ω)
Red (8Ω)
Negative -
Black Post
No Dot
No Dot

Recently Viewed Products