R600-4D 600 Watt Full-Range Class-D 4-Channel Amplifier

The PRIME R600-4D is an ultra-efficient 4-channel amplifier producing 150 Watts into four channels at 2-Ohms. Run a 4-way full-range system or use it with components on the front channels with subwoofers on the rear.

  • 12dB/octave Butterworth crossover
  • RCA pass-thru outputs
  • Tri-stage protection covers thermal, over-current and short circuits.
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • 2/4 channel input switch
  • 4 Gauge power/ground connectors
  • Cast aluminum heatsink
  • Top mounted controls
  • 1 Year Standard Warranty warranty info
Full Range Class-D

R600-4D

The Prime R600-4D amplifier offers high efficiency through the implementation of its Class-D circuitry while being able to power a full-range system. This amplifier is optimized for 4-channel front/rear systems so you can run midrange/tweeters in the front doors/dash while running midrange/tweeters in the rear doors/deck. Match with a mono amplifier for subwoofers and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.


CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
CE Compliant

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the...
Learn more
Full Range Class-D

Full Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that...
Learn more
CEA-2006 Compliant: CEA-2006 Power Rating
100W x 4 @ 4Ω
≤1.0% THD+N
Number of Channels: 4
Rated Power
(RMS Continuous Power):
100 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power):
600 Watts RMS
Dynamic Power
(PVC/PowerCube®):
129 Watts x 4 @ 4-Ohms 0° Res
220 Watts x 4 @ 2-Ohms 0° Res
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/-1dB
Efficiency (average): 80% @ 4-Ohm
75% @ 2-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls: Front: Variable 50Hz - 500Hz @ 12dB/Octave
Rear: Variable 50Hz - 500Hz @ 12dB/Octave
Tone Controls: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: Low Level: 2 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 12 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: -
Visual Indicators: Power
Protect
Circuit Topology Class: Full Range Class-D
Operating Voltage: 9 - 16 VDC
Recommended Fuse
(not included):
100 A
Max. Current Draw (13.8V Sinewave): 75 A
Average Current Draw (13.8V Music): 38 A
Suggested Alternator: 75 A
Shipping Weight: 7.038 Lbs. (3.19 Kg.)
Dimensions (HxWxL): 1.97" x 6.77" x 11.06"
(5cm x 17.20cm x 28.10cm)
Dimensional Diagram:

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the r600-4d.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the r600-4d.

My Stuff
My Stuff

View status of current inquiry or review question history.

RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

read more...
RFI-20

20 Feet Twisted Pair Signal Cable
MSRP $15.99

read more...
RFD4

4 AWG Distribution Block
MSRP $21.99

read more...
RFC1

1 Farad Capacitor
MSRP $129.99

read more...

Recently Viewed Products