P1000X4D 1,000 Watt Class-D Full-Range 4-Channel Amplifier

The Punch P1000X4D is an ultra-efficient 4-channel amplifier capable of producing 250 Watts into 2-Ohms without excessive drain on your charging system. The P1000X4D amplifier can also be run in bridged/mono mode for use with subwoofers.

12dB/octave Butterworth crossover
Top mounted controls
2/4 channel switch
4 Gauge power/ground connectors
Cast aluminum heatsink
MOSFET output stage
MOSFET power supply
RCA pass-thru outputs
Top Mounted LED Indicators
1 Year Standard Warranty

Find Dealer USD 649.99

Bright Idea

Spin Me

Overview
Technologies
Specifications
Support
Accessories
WiringWizard

P1000X4D

The P1000X4D 1,000 Watt full-range 4-channel amplifier is a perfect edition to the famous Rockford Fosgate Punch amplifier line-up. Known world-wide for brute power, this Class-D design offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits. On-board Punch Bass will also supplement low frequency "boom" to give your music more impact and presence than a live stadium concert.

Downloads

2011 Punch Full Range Class-D Amplifiers - owner's manual

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...

Learn more

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from...

Learn more

Full Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that...

Learn more

CEA-2006 Compliant:

Number of Channels:

Rated Power
(RMS Continuous Power):

150 Watts x 4 @ 4-Ohm
250 Watts x 4 @ 2-Ohm
500 Watts x 2 @ 4-Ohm Bridged

Total Power
(Sum of Rated Power):

1000 Watts RMS

Dynamic Power
(PVC/PowerCube® Measurement):

760 Watts x 4 @ 4-Ohms
1225 Watts x 4 @ 2-Ohms

Bridgeable:

Yes

Efficiency (average):

85% @ 4-Ohm
85% @ 2-Ohm

Crossover Controls:

Front: LP/HP/AP 50Hz - 500Hz @ 12dB/Octave
Rear: LP/HP/AP 50Hz - 500Hz @ 12dB/Octave

Tone Controls:

Front: 0dB to +18dB @ 45Hz
Rear: 0dB to +18dB @ 45Hz

Signal Input:

Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 2 RCA Pair

Signal Output:

Low Level: 1 RCA Pair

Power Input Connector:

Block

Power Wire Gauge:

4 AWG

Speaker Output Connector:

Block

Speaker Wire Gauge:

12 AWG

Heat Sink Type:

Cast

Cooling:

Convection

Remote Controls:

n/a

Visual Indicators:

Power
Thermal
Protect

Circuit Topology Class:

Full Range Class-D

Frequency Response:

10Hz - 35kHz +/-3dB

Shipping Weight:

10.8 Lbs.
(4.89 Kg.)

Dimensions (HxWxL):

2.2 x 8.1 x 11.9 (in)
5.6 x 22.6 x 30.2 (cm)

Dimensional Diagram:

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process

RFTECH Support

Find Answers

Search for answers regarding the .

Ask A Question

Submit a question to our RFTECH staff about the .

My Stuff

View status of current inquiry or review question history.

RFK4

4 AWG Power Installation Kit
MSRP $111.99

RFC1

1 Farad Capacitor
MSRP $129.99

RFK4I

4 AWG Power & Signal Installation Kit
MSRP $129.99

RFDB4

4 AWG Positive/Negative Battery Terminal
MSRP $17.99

PEQX3

Remote PEQ Controls up to 3 Amplifiers
MSRP $56.99

RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

RFK4D

4 AWG Complete Installation Kit
MSRP $185.99

RFI-20

20 Feet Twisted Pair Signal Cable
MSRP $15.99

PEQ

Remote Punch EQ
MSRP $30.99

RFK1

1/0 Power Installation Kit
MSRP $251.99

RFK1D

Dual Amp 1/0 AWG Wiring Kit
MSRP $333.99

Woofer WiringWizard

The below woofer wiring diagrams are compatible with this amplifier and are designed to optimize power output. The diagrams were selected simply by choosing woofer configurations that match the amplifier's recommended speaker load. Care should be taken to select woofers with a total power rating that can safely handle the amplifier's RMS power output.