|
deltacottonboy12
Starting Member
13 Posts |
 Posted - 09/24/2007 : 4:13:57 PM
|
hey guys, i hope i'm posting this in the right place, if not let me know. but heres my "problem". this occured after my dad borrowed my truck, and he likes to listen to that talk radio, which has a ton of distortion. but anyway, at a very low volume, you could here the sub hitting, and as the volume progressed upward, the sub would begin to rattle, as if it was blown. turns out its not, the RIGHT CHANNEL POSITVE terminal apparently has a problem. the sub only rattles when hooked to that terminal. sub works fine when not bridged, but i loose a lot of power to the sub. my question is, can i replace that channel myself, or do i need to leave it alone and just send half the watts, or is it wise to have someone else work on it?
P3002
P2 12 thats my setup. panasonic head unit. |
|
Discussion Forum
P3002 problems
