NOTICE: This is a customer-to-customer discussion forum. DO NOT post messages here when requiring manufacturer support, instead please submit a question using our Knowledge Base.
I have a JL Audio 13w7 factory box that is wired 3ohms(dual vc 1.5 each). Could I rewire it parallel which I think would be .75ohms and will the T1000-1bd handle it? Thanks Chris
Rockford Fosgate does not recommend the amplifier to be run at anything lower than the recommended 1-ohm load, as the protection circuit will most likely start activating.
Those subwoofers are intended to be run in Trio's, meaning (3) subwoofers connected to one amplifier, thus creating a 4-ohm load.
Discussion Forum
will T1000-1bd run at 3/4 ohms?
Posted - 09/09/2009 : 09:31:14 AM
