Punch 1,000 Watt 2-Channel Amplifier P1000X2
Punch 1,000 Watt 2-Channel Amplifier P1000X2
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
Notify Me When Back In Stock:
The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
FEATURES AT A GLANCE
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- High level input capable with Auto Turn-On circuit
- On-board Punch EQ with +18dB boost @ 45Hz
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- Short circuit protection
- Over current protection
- Cast aluminum heatsink
- Muted turn on
- Stealth top mounted control panel
- 1 Year Warranty
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help ...
Learn more
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
Differential inputs eliminate noise picked up by signal cables.
Learn more
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...
Learn more
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...
Learn more
TRANS•ana
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...
Learn more
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Learn more
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...
Learn more
NOMAD
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...
Learn more
CTA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...
Learn more
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
Learn more
DTM
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
(Sum of Rated Power)
(RMS Continuous Power)
500 Watts x 2 @ 2-Ohm
1000 Watts x 1 @ 4-Ohm Bridged
(PVC/PowerCube®)
656 Watts x 2 @ 2-Ohms 0° Res
64% @ 2-Ohm
2-Ohm: <1.0%
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
(not included)
6.05 x 19.71 x 38.18 (cm)
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
ARE YOU ENGINEERED TO ROCK?
Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit.
We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit!
- 1 Purchase a Rockford Fosgate Punch or Power amplifier.
- 2 Add the correct amplifier installation kit.
- 3 Get an additional 1 year amplifier warranty FREE!
Complete Your System
Rockford Fosgate products are built to work together seamlessly for the ultimate experience.
+
Punch 15" P3 4-Ohm DVC Subwoofer
P3D4-15The P3D4-15 is the best performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Punch Pro 10" 4-Ohm Midrange (ea)
PPS4-10The Pro PPS4-10 is an 10” 4-Ohm woofer engineered specifically for high SPL (Sound Pressure Level) conditions. It features 350 watt RMS power handing and includes grilles with mounting hardware. Sold individually (1 each).
Click to explore some of the products that work best.
-
P3D4-15
-
PPS4-10
Punch 15" P3 4-Ohm DVC Subwoofer
The P3D4-15 is the best performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Punch Pro 10" 4-Ohm Midrange (ea)
The Pro PPS4-10 is an 10” 4-Ohm woofer engineered specifically for high SPL (Sound Pressure Level) conditions. It features 350 watt RMS power handing and includes grilles with mounting hardware. Sold individually (1 each).
Click to explore some of the products that work best.
P3D4-15
PPS4-10
Be first to hear about the latest products.
Sign up for product updates.