R125-2 125 Watt 2-Channel Amplifier

The Prime R125-2 is a 125 watt 2-Channel amplifier capable of running 2-Ohms stereo and/or 4-Ohms bridged/mono. Includes on-board Punch Bass and crossover controls along with built-in Pass-Thru RCA jacks.

  • RCA pass-thru outputs
  • MOSFET power supply
  • Punch Bass EQ
  • 12dB/octave Butterworth crossover
  • 4 Gauge power/ground connections with built-in ATC fusing
  • 1 Year Standard Warranty warranty info
Class-AB

R125-2

The Prime R125-2 is a 2-Channel amplifier perfect for any Car Audio Fanatic getting into mobile audio. This amplifier features variable Punch Bass to tune low frequencies, variable crossover to either protect your high frequency speakers or feeding only bass to your subwoofers, and Pass-Thru jacks for daisy-chaining another amplifier.


P.O.W.E.R.

P.O.W.E.R.

Power supply and output design that allows the amplifier to increase power output as voltage...
Learn more
CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
Class-AB

Class-AB

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.
Learn more
CEA-2006 Compliant: CEA-2006 Guidelines
Number of Channels: 2
Rated Power
(RMS Continuous Power):
40 Watts x 2 @ 4-Ohms
65 Watts x 2 @ 2-Ohms
125 Watts x 1 @ 4-Ohms Bridged
Total Power
(Sum of Rated Power):
125 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/-1dB
Efficiency (average): 60% @ 4-Ohm
55% @ 2-Ohm
Crossover Controls: High-Pass (HP): 80Hz Fixed @ 12dB/octave Butterworth
Low-Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
Signal Input: Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Barrier Strip
Power Wire Gauge: 4 AWG
Speaker Output Connector: Barrier Strip
Speaker Wire Gauge: 8 AWG
Heat Sink Type: Extruded Aluminum
Cooling: Convection
Remote Controls:
Visual Indicators: Power
Protect
Circuit Topology Class: Class-A/B
Shipping Weight: 4.2 Lbs.
(1.9 Kg.)
Dimensions (HxWxL): 2.4 x 7.7 x 7.7 (in)
6.1cm x 19.6cm x 19.6cm (cm)
Dimensional Diagram:

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the r125-2.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the r125-2.

My Stuff
My Stuff

View status of current inquiry or review question history.

RFDB4

4 AWG Positive/Negative Battery Terminal
MSRP $17.99

read more...
RFK8X

8 AWG Complete Installation Kit
MSRP $101.99

read more...

Recently Viewed Products