Prime 300 Watt 4-Channel Amplifier R300X4

R300X4_1
R300X4_2
R300X4_5
R300X4_4
R300X4_6
R300X4_3

Prime 300 Watt 4-Channel Amplifier R300X4

The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.

• This model replaced by the R2-300X4

Read More
1 Review
Discontinued
Overview

Rockford Fosgate amplification at an unbelievable value. The R300X4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done! Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

FEATURES AT A GLANCE

  • Real time output and power supply thermal sensing
  • 12dB/octave Butterworth crossover
  • 2/4 channel input switch
  • Separate Front and Rear Gain Control
  • 0/6/12 dB On Board Punch EQ Control
  • High Level Input (4-pin)
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Cast aluminum heatsink
  • Over current protection
  • Muted turn on
  • Short circuit protection
  • 1 Year Warranty
Technologies
Class-A/B

An amplifier topology with the best of both worlds; a Class-A preamp and Class-B output stage.

Learn more
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
300 Watts RMS
Rated Power
(RMS Continuous Power)
50 Watts x 4 @ 4-Ohm
75 Watts x 4 @ 2-Ohm
150 Watts x 2 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)
68 Watts x 4 @ 4-Ohms 0° Res
98 Watts x 4 @ 2-Ohms 0° Res
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/-1dB
Input Sensitivity
150 mV - 4 V
Circuit Topology Class
Class A/B
Efficiency (average)
69% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
High Level: 4-pin MOLEX
Low Level: 2 RCA pair
Signal Output
-
Tone Controls
Front Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz

Rear Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz

Function works when crossover in (LP) position
Crossover Controls
Front Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth

Rear Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
Remote Controls
-
Visual Indicators
Power/Protect LED
Power Wire Gauge
4 AWG
Power Input Connector
Screw terminal
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Screw terminal
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
50 A
Average Current Draw (13.8V Music)
25 A
Max. Current Draw (13.8V Sinewave)
50 A
Suggested Alternator
75 A
Included In The Box
Dimensions (H x W x D)
1.98 x 6.77 x 13.19 (in)
5 x 17.2 x 33.5 (cm)
Shipping Weight
7.8 Lbs. (3.53 Kg.)
Compatibility
Support

Knowledge Base Articles

  • No Knowledge Base articles

Show all Knowledge Base topics

Ask Our Experts

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize the REAR CHANNELS of this amp for its lowest recommended BRIDGED/MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Great amp

I have this on 5x7 Polk audio door speakers in a 2008 Ford explorer. Delivers clean power to my speakers and I can adjust rear gain to balance my system rather than using my fader. No overheating issue and it's in a fairly enclosed space. If u want compact size this is not the amp otherwise it will be more than what u hoped it to be

5.0

1 Review
Write a Review

Be first to hear about the latest products.

Sign up for product updates.