R500-1D 500 Watt Class-D Mono Amplifier

The Prime R500-1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

  • RCA pass-thru outputs
  • MOSFET power supply
  • Punch Bass EQ
  • Remote PLC (Punch Level Control)
  • 12dB/octave Butterworth crossover
  • 4 Gauge power/ground connections with built-in ATC fusing
  • 0°/180° Phase Switch
  • 1 Year Standard Warranty warranty info
Class-D

R500-1D

Are you ready for a dedicated subwoofer amplifier? The Prime R500-1D is the perfect companion for any Car Audio Fanatic getting into mobile audio who wants a two-amplifier system: one amp running mids/highs and the second running subwoofers. This amplifier features variable Punch Bass, variable crossovers, Pass-Thru jacks to daisy chain another amplifier, and a remote Punch Level Control for mounting under the dash or the center console.


CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...
Learn more
P.O.W.E.R.

P.O.W.E.R.

Power supply and output design that allows the amplifier to increase power output as voltage...
Learn more
Class-D

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.
Learn more
CEA-2006 Compliant: CEA-2006 Guidelines
Number of Channels: 1
Rated Power
(RMS Continuous Power):
250 Watts x 1 @ 4-Ohms
500 Watts x 1 @ 2-Ohms
Total Power
(Sum of Rated Power):
500 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/-1dB
Efficiency (average): 85% @ 4-Ohm
85% @ 2-Ohm
Crossover Controls: Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth
Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
Phase Control: Variable 0° to 180°
Signal Input: Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Barrier Strip
Power Wire Gauge: 4 AWG
Speaker Output Connector: Barrier Strip
Speaker Wire Gauge: 8 AWG
Heat Sink Type: Extruded Aluminum
Cooling: Convection
Remote Controls: Punch Level Control:
When connected is linked to "gain control" to provide remote output level
Visual Indicators: Power
Protect
Circuit Topology Class: Class-D
Shipping Weight: 5.1 Lbs.
(2.31 Kg.)
Dimensions (HxWxL): 2.4 x 7.7 x 7.7 (in)
6.1 x 19.6 x 19.6 (cm)
Dimensional Diagram:

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the r500-1d.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the r500-1d.

My Stuff
My Stuff

View status of current inquiry or review question history.

RFK8X

8 AWG Complete Installation Kit
MSRP $101.99

read more...
RFDB4

4 AWG Positive/Negative Battery Terminal
MSRP $17.99

read more...
PLC

Punch Level Control For Prime Amps
MSRP $20.99

read more...

Recently Viewed Products