T2S2-16

Power 16" T2 Single 2-Ohm Subwoofer

The Power T2S2-16 subwoofer features 16-inches of effective radiating cone area and a single 2-ohm voice coil for ease of wiring.

  • Three layer glass fiber/Aramid honeycomb/Glass fiber cone
  • Aluminum dustcap
  • Injection molded foam surround with VAST™
  • Proprietary surround mechanical clamping ring
  • Dual Nomex progressive spiders with integrated lead wires
  • Aluminum diecast frame with integrated heat sink fins
  • Custom push spring insulated 8 AWG terminals
  • Single layer edge wound aluminum 4" voice coil
  • Detachable die cast aluminum trim ring
  • Vented pole piece
  • Triple stack segmented ferrite motor structure
  • Integrated aluminum heat sinking shorting ring (IDHS)
  • 1 Year Standard Warranty warranty info
USD 1,499.99


Find Dealer

T2S2-16

This subwoofer is not just another made with off-the-shelf parts, we wanted something better, and we knew our fanatics demand this as well. Since the original Power T2 subwoofer was designed by one of the leading loudspeaker engineers in the world, there were some lofty goals that had to be reached. Work was done from the ground-up to out-perform it’s previous family members, while incorporating valuable feedback from our great network of Rockford Fosgate dealers. They wanted it bigger and badder with dual everything, and we feel that goal was crushed.

Why 13-inches?  Well, this is a combination of the cone and surround assembly described as the "total effective radiating area".  Since this model is so massive, we incorporated dual spiders for exceptional travel of the cone assembly. The motor structure operates very linear for exceptional sonic quality and the IDHS heat-sink gives the subwoofer impressive power handling capacity. Top it off with proprietary input terminals for large gauge cables to efficiently deliver the needed voltage, and this subwoofer is ready to drop the doom!

WARNING: Use caution when installing this subwoofer. It’s heavier than Atlas holding a globe on his shoulders.
CEA-2031

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Learn more
Klippel Verified

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
Learn more
Inductive Damping Heat Sink

Inductive Damping Heat Sink

Secures directly to the top of magnet structure to improve system efficiency by reducing both...
Learn more
VAST Surround - Subs

VAST Surround - Subs

The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating...
Learn more
FlexFit Basket - Subwoofer

FlexFit Basket - Subwoofer

The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position.
Learn more
Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat...
Learn more
Stitched Tinsel Leads

Stitched Tinsel Leads

Improved reliability and performance by reducing fatigue and possible shorting.
Learn more
CEA-2031 Compliant: CEA-2031 Guidelines
Size: 16"
Subwoofer Type: Standard
Power Handling (Watts RMS): 2500 Watts RMS
5000 Watts Max
Nominal Impedance: 2-Ohm
Voice Coil Type: Single Voice Coil
Voice Coil Diameter: 3.96" (100 mm)
Magnet Weight (oz): 529 oz. (15 Kg)
Speaker Connector: 8 AWG slot loaded
Fs (Hz): 28.5
Re (Ohms): 1.6
Le (mH): 0.91
Qms: 3.76
Qes: 0.56
Qts: 0.49
Vas (Liters): 90.1
Sd (cm2): 1034
SPL (dB @ 1w/1m): 87
Xmax (mm): 34
Sealed Box Volume (Vb): 2.4 cu. ft. (67.9 Liters)
Vented Box Volume (Vb): 5.5 cu. ft. (155 Liters)
Woofer Displacement: 0.289 cu. ft. (8.2 Liters)
Cutout Diameter: 15.04 in. (382 mm)
Mounting Depth: 10.47 in. (266 mm)
Shipping Weight: 100.80 Lbs. (45.7 Kg.)

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the t2s2-16.

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the t2s2-16.

My Stuff
My Stuff

View status of current inquiry or review question history.

RFWP12-15
RFWP12-15

12 AWG Speaker Wire Packaged 15 Foot Black/Silver
MSRP $24.99

read more...
RFDS-TRUNK
RFDS-TRUNK

Sound Deadening Trunk Kit
MSRP $170.99

read more...
Rockford FosgateWoofer WiringWizard



Available Wiring Diagrams


Please consult your amplifier owner's manual for lowest recommended impedance.

Wiring Diagram #1


Wiring Diagram #2


Wiring Diagram #3


Wiring Diagram #4


Wiring Diagram #5


Wiring Diagram #6


Wiring Diagram #7


Speaker Polarity
Your woofer may use one of the following to identify (+/-) terminals.
Positive +
Red Post
Purple (4Ω)
Red (8Ω)
Negative -
Black Post
No Dot
No Dot
EBP

Please rotate mobile device to landscape to view graph.

Amp Power Range

Please rotate mobile device to landscape to view graph.

Sealed Recommended Design
This is the optimum recommended sealed woofer enclosure and replicates the optimum enclosure listed in the owner's manual. You may notice slight differences between online information and the owner's manual due to continual improvement on usage of our products.
t2s1-16_t2s2-16_sealed.png
  • All sides use 3/4" (18mm) thick MDF.
  • All box dimensions are external.
  • Dimensions above include Vb + woofer displacement.
  Standard Metric
Vb (Gross) 2.40 cu. ft. 67.96 Liters
F3 43.30 Hz  
Qtc 0.74  
Height 19.50 in. 49.53 cm
Width 21.00 in. 53.34 cm
Depth 14.50 in. 36.83 cm
Spk. Cutout 0.000 in. 0.000 cm
Spk. Depth 10.47 in. 26.59 cm
Vd 0.000 cu. ft. 0.000 Liters

EXPORT

Modify This Box Wire This Woofer
Vented Recommended Design
This is the optimum recommended vented woofer enclosure and replicates the optimum enclosure listed in the owner's manual. You may notice slight differences between online information and the owner's manual due to continual improvement on usage of our products.
t2s1-16_t2s2-16_vented.png
  • All sides use 3/4" (18mm) thick MDF.
  • All box dimensions are external.
  • Dimensions above include Vb + woofer/port displacement.
  • Port diagram for reference only and may require alternate placement.
  • An infrasonic filter is required for reliable performance in vented designs.
  Standard Metric
Vb (Gross) 5.50 cu. ft. 155.74 Liters
F3 29.00 Hz  
Fb 35.00 Hz  
Height 20.00 in. 50.80 cm
Width 33.00 in. 83.82 cm
Depth 18.50 in. 46.99 cm
Np 3 port  
Dp 4.00 in. diameter 10.16 cm diameter
Lp 10.00 in. long 25.40 cm long
Spk. Cutout 0.000 in. 0.000 cm
Spk. Depth 10.47 in. 26.59 cm
Vd 0.000 cu. ft. 0.000 Liters
Vp 0.218 cu. ft. 2.059 Liters

EXPORT

Modify This Box Wire This Woofer
Infinite Baffle Design
Not Recommended for Infinite Baffle
  • Baffle board uses 3/4" (18mm) thick MDF.
  • Baffle board & cavity air leaks can cause significant performance loss.
  • For optimum results, ensure cavity & baffle board are air tight.
  • An infrasonic filter is required for reliable performance in IB designs.

Do Not Use Infinite Baffle

This woofer is not recommended for Infinite Baffle; it is optimized for the design(s) above. If you require this type of design, here are some recommendations:

  • Select another Woofer Family (M1, M2, etc).
  • Select another Woofer Series (Prime, Punch, etc.).
  • Select another Woofer Size (10", 12", etc).

Recently Viewed Products