RF-BLD Balanced Line Driver

The RF-BLD is a 2-channel line driver that boosts low source unit signals or drives amplifiers located a long distance to the back of a vehicle. The BLD features Single Ended or Balanced Differential mode to eliminate noise.

  • 2 channel inputs/outputs
  • Low output impedance
  • Selectable 'Balanced Differential' or 'Single Ended' inputs and outputs
  • High voltage line driver
  • Output level indicators
  • Speaker level to RCA line level converter
  • Low distortion, low noise operation
  • 1 Year Standard Warranty warranty info

RF-BLD

If your source unit has low output voltage or your amplifiers are located far back in a Van or SUV, the BLD is a perfect for your system. Featuring 'Balanced Differential' or 'Single Ended' mode, its high voltage output combined with a low output impedance will drive large arrays of amplifiers without breaking a sweat. In 'Balanced Differential' mode, it's twisted pair design also helps eliminate radiated noise through electrical cancellation.


Low Output Impedance

Low Output Impedance

Ability of a processor to drive a noise free signal to an amplifier or large array of amplifiers.
Learn more
Differential Inputs

Differential Inputs

Differential inputs eliminate noise picked up by signal cables resulting in clean signal transfer.
Learn more
Balanced/Unbalanced Signal Output

Balanced/Unbalanced Signal Output

The Balanced and Unbalanced mode allows the output signal to properly match the input of the...
Learn more
Configuration: Line Driver
Operating Voltage: 9-16 VDC
Frequency Response: 20Hz - 50kHz ±1dB
Input Impedance: 20k Ohms
Output Impedance: 55 Ohms
Signal Input: High-Level: 2-channel (left/right)
Low-Level: (2) RCA (left/right)
Signal Output: Low-Level: (2) RCA (left/right)
Input Voltage: 650mV to 10.5V RMS
Output Voltage: 11 Vrms Unbalanced
22 Vrms Balanced
Gain: +0.8dB to +24dB
THD+N: 0.01%
Signal-to-Noise: ≥ 90dB @ 2V ('A' Weighted)
≥ 110dB @ 10V ('A' Weighted)
Mounting: Behind Dash (install as close to source unit as possible)
Shipping Weight: 1.1 Lbs.
(0.49 Kg.)
Dimensions: H 1.32" x W 5.90" x D 4.09"
3.35cm x 15.0cm x 10.38cm

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process
RFTECH Support
Find Answers
Find Answers

Search for answers regarding the .

Ask A Question
Ask A Question

Submit a question to our RFTECH staff about the .

My Stuff
My Stuff

View status of current inquiry or review question history.

Recently Viewed Products