P1000X1D 1,000 Watt Class-D Full-Range Mono Amplifier

The Punch P1000X1D is an efficient mono amplifier producing 1,000 Watts into a 1-Ohm or 2-Ohm load without excessive pull on the electrical system. The frequency response of the P1000X1D is optimized for mid-bass and subwoofers.

0°/180° Phase Switch
Top mounted controls
24dB/octave crossover
4 Gauge power/ground connectors
Cast aluminum heatsink
Infrasonic filter
MOSFET output stage
MOSFET power supply
RCA pass-thru outputs
Top Mounted LED Indicators
1 Year Standard Warranty

Find Dealer USD 649.99

Bright Idea

Overview
Technologies
Specifications
Support
Accessories
WiringWizard

P1000X1D

The P1000X1D 1,000 Watt full-range mono amplifier is versitle enough to run as a dual-mono system (one amplifier for front-left speakers and one amplifier for front-right speakers) or just for subwoofers. This amplifier has on-board Punch Bass to provide low frequency "boom" and features an infrasonic filter to keep damaging inaudible frequencies from damaging your subs.

Downloads

2011 Punch Full Range Class-D Amplifiers - owner's manual

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These...

Learn more

Full Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that...

Learn more

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from...

Learn more

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more

CEA-2006 Compliant:

Number of Channels:

Rated Power
(RMS Continuous Power):

500 Watts x 1 @ 4-Ohm
1000 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm

Total Power
(Sum of Rated Power):

1000 Watts RMS

Dynamic Power
(PVC/PowerCube® Measurement):

574 Watts x 1 @ 4-Ohms
1099 Watts x 1 @ 2-Ohms

Bridgeable:

Efficiency (average):

90% @ 4-Ohm
90% @ 2-Ohm

Crossover Controls:

Low Pass: 50Hz - 500Hz @ 24dB/Octave
Infrasonic: 25Hz @ 24dB/Octave

Tone Controls:

0dB to +18dB @ 45Hz
0°/180° Variable Phase

Signal Input:

Input Switch: Hi/Low level input
Low Level: 1 RCA Pair

Signal Output:

Low Level: 1 RCA Pair

Power Input Connector:

Block

Power Wire Gauge:

4 AWG

Speaker Output Connector:

Block

Speaker Wire Gauge:

12 AWG

Heat Sink Type:

Cast

Cooling:

Convection

Remote Controls:

Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2)

Visual Indicators:

Power
Thermal
Protect

Circuit Topology Class:

Class-D

Frequency Response:

10Hz - 500Hz +/-3dB

Shipping Weight:

9.2 Lbs.
(4.17 Kg.)

Dimensions (HxWxL):

2.2 x 8.1 x 10.7 (in)
5.6 x 22.6 x 27.2 (cm)

Dimensional Diagram:

Knowledge Base Articles

Show all Knowledge Base topics

Customer Discussion Forums

NOTE: Views expressed by fanatics in our customer forum may not represent the views of Rockford Fosgate.

No recent Discussion Forum topics posted
Show all Customer Discussion Forums

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process

RFTECH Support

Find Answers

Search for answers regarding the .

Ask A Question

Submit a question to our RFTECH staff about the .

My Stuff

View status of current inquiry or review question history.

RFK4

4 AWG Power Installation Kit
MSRP $111.99

RFC1

1 Farad Capacitor
MSRP $129.99

RFK4I

4 AWG Power & Signal Installation Kit
MSRP $129.99

RFDB4

4 AWG Positive/Negative Battery Terminal
MSRP $17.99

PEQ

Remote Punch EQ
MSRP $30.99

RFK4X

4 AWG Complete Installation Kit
MSRP $157.99

PEQX3

Remote PEQ Controls up to 3 Amplifiers
MSRP $56.99

RFK4D

4 AWG Complete Installation Kit
MSRP $185.99

RFK1

1/0 Power Installation Kit
MSRP $251.99

RFK1D

Dual Amp 1/0 AWG Wiring Kit
MSRP $333.99

Woofer WiringWizard

The below woofer wiring diagrams are compatible with this amplifier and are designed to optimize power output. The diagrams were selected simply by choosing woofer configurations that match the amplifier's recommended speaker load. Care should be taken to select woofers with a total power rating that can safely handle the amplifier's RMS power output.