All In
One Solution

Powerful & Compact


The T1000X5ad Element Ready multi-channel amplifier is a
1000 WATT RMS solution with a true 600 watt subwoofer channel that is combined with our patented four-channel full range ad technology platform giving you a single amplifier to efficiently power your entire audio system.


Buy Now Quick Specs

View all Amps

Dual Fan Induction

Heat is one of the biggest enemies an amplifier can have. The more power an amplifier makes, the more heat it generates. This is often combated by adding a large heat sink mass to draw the heat away and dissipate it to the surrounding air. When you take that large power amplifier and make it physically smaller without sacrificing its capabilities, you have to do something different. This is why the T1000X5ad uses "dual fan forced induction" to augment the cooling effect of the heat sink. This system pulls in fresh air and directs it into front and rear channels to draw heat off the MOSFETS. This hot air Is then driven out of the amplifier through vent at the other end.

C.L.E.A.N. Technology

Rockford’s integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise) uses simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers. This precise level set-up eliminates speaker damaging distortion.

Quick Disconnect

Making wire connections to an amplifier can at times be challenging at best. Whether it’s the mounting location or the wire connection types, it can sometimes take longer than mounting the amp itself. This is why we have chosen to use quick disconnect connectors on our Power small chassis amplifiers. This allows you to connect directly to the wire first and then simply plug it into the amplifier ensuring not only a tighter wire connection, but a faster install time.

One Amplifier, Infinite Possibilities

Rated Power:
100 Watts x 4 @ 4-Ohm + 400 x 1 @ 4-Ohm
100 Watts x 4 @ 2-Ohm + 600 x 1 @ 2-Ohm
N/A + 600 Watts x 1 @ 1-Ohm
200 Watts x 2 @ 4-Ohms Bridged + N/A
Total Power:
1000 Watts
Bridgeable:
Yes
Crossover
Controls:
HP/LP: 50Hz - 250Hz @ 12dB/Octave Butterworth
Subwoofer: 50Hz - 250Hz @ 12dB/Octave Butterworth
Infrasonic: 28Hz @ 12dB/Octave Butterworth
Speaker Wire Gauge:
Sub: 10 AWG
Front/Rear: 16 AWG
Cooling:
Dual Fan Cooled
Remote Controls:
Optional PLC2 provides Punch Level Control
Circuit Topology Class:
Channels 1/2/3/4: Class-AD
Sub Channel: Class BD
Dimensions
(H x W x D):
1.6 x 4.3 x 12 (in.)
4.1 x 10.8 x 30.5 (cm)

For additional details select a model below

Mobile Element Ready