300 Watt Mono Amplifier P3001

300 Watt Mono Amplifier P3001

Read More
0 Reviews
Discontinued
Overview

If space is limited in your vehicle but you don’t want to sacrifice performance, the P3001 is the amplifier for you. Small enough to fit nearly any install with the power to add some PUNCH to your subwoofers!

  • Stealth Connections
  • 4 Gauge power/ground connections with built-in ATC fusing
  • Connector Cover
  • Focused mass heatsink design
  • RF Logo with Interactive Signal Display
  • Thermal Sensing
  • Aux Ouputs
  • 1 Year Warranty
Technologies
MEHSA
MEHSA

Rockford Fosgate amps use MEHSA, a thermal substrate that maximizes heat transfer between MOSFET power devices ...

Engineered In The USA
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Balanced Differential Inputs
Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

TRANS&#149;<em>ana</em>
TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

NOMAD
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

TO-247 MOSFETs
TO-247 MOSFETs

(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...

Punch Bass EQ
Punch Bass EQ

Pioneered by Jim Fosgate in the early 70's, Punch Bass compensates for acoustical problems common in ...

Specifications
Number of Channels
1
CEA-2006 Compliant
CEA-2006 Guidelines
Rated Power
(RMS Continuous Power)
150 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power)
300 Watts RMS
Bridgeable
No
Crossover Controls
High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Tone Controls
Bass: 0dB to +18dB @ 45Hz
Signal Input
Low level: 1 RCA pair
Power Input Connector
Block
Speaker Output Connector
Screw terminal barrier strip
Power Wire Gauge
4 AWG
Speaker Output Connector
Screw terminal barrier strip
Speaker Wire Gauge
8 AWG to 18 AWG
Heat Sink Type
Cast aluminum
Cooling
Convection
Remote Controls
Punch Bass EQ (included with cable)
Visual Indicators
Power On
Signal Level
Thermal Status
Speaker protection
Circuit Topology Class
Class BD
Frequency Response
20Hz to 20kHz +/- 0.5 dB
Dimensions (H x W x D)
2.4 x 11 x 11.7 (in)
6.1 x 27.9 x 29.7 (cm)
Shipping Weight
11.5 Lbs.
(5.2 Kg.)
Support

Knowledge Base Articles

  • No Knowledge Base articles

Show all Knowledge Base topics

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


View Process

Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.























Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Wiring Kits

ARE YOU ENGINEERED TO ROCK?

Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit.

We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit!

  • 1 Purchase a Rockford Fosgate Punch or Power amplifier.
  • 2 Add the correct amplifier installation kit.
  • 3 Get an additional 1 year amplifier warranty FREE!

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.