Hot Holiday Deals on Select Products Sitewide!
Start Here!

1000 Watt 4-Channel Amplifier T1000-4

1000 Watt 4-Channel Amplifier T1000-4

Read More
0 Reviews

Need a powerful amplifier to drive a 2-ohm stereo speaker system with a 4-ohm bridged/mono woofer load? This is the perfect amplifier for you, and with 1,000 watts divided between 4 channels, you will never run out of bass pumping power.

  • 2/4 channel input switch
  • 24dB/octave crossover
  • 1/0 AWG power/ground connectors
  • Audiophile grade speaker connections
  • MOSFET power supply
  • MOSFET output stage
  • RCA pass-thru outputs
  • Blue L.E.D. Simulated VU Signal Meters
  • 2 Year Warranty
CEA-2006 Compliant
CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's ...

Rockford Fosgate Avatar
Rockford Fosgate Avatar

These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered ...


DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...


Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.


MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.


NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Punch EQ2
Punch EQ2

Onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12kHz.


(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...


Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

Input Sensitivity
150 mV to 4 V
CEA-2006 Compliant
Max. Current Draw (13.8V Sinewave)
150 A
Shipping Weight
19.6 Lbs. (8.89 Kg.)
Recommended Fuse
(not included)
150 A
Average Current Draw (13.8V Music)
75 A
Total Harmonic Distortion (THD+Noise)
Number of Channels
Rated Power
(RMS Continuous Power)
150 Watts x 4 @ 4-Ohm
250 Watts x 4 @ 2-Ohm
500 Watts x 2 @ 4-Ohm Bridged

STABLE @ 2-Ohm x 2 Bridged (reduced thermal time may occur)
Total Power
(Sum of Rated Power)
1000 Watts RMS
Dynamic Power
Front Channels:
222 Watts x 2 @ 4-Ohms 0° Res
390 Watts x 2 @ 2-Ohms 0° Res

Rear Channels:
223 Watts x 2 @ 4-Ohms 0° Res
387 Watts x 2 @ 2-Ohms 0° Res
Efficiency (average)
70% @ 4-Ohm
65% @ 2-Ohm
Crossover Controls
Front Channels: High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth

Rear Channels:
High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
Tone Controls
Front Channels:
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz

Rear Channels:
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Function depends upon crossover setting (LP/AP/HP)
Signal Input
Front Channels:
1 RCA pair

Rear Channels:
1 RCA pair
Signal Output
1 RCA pair
Power Input Connector
Power Wire Gauge
1/0 AWG
Speaker Output Connector
Speaker Wire Gauge
8 AWG to 16 AWG
Heat Sink Type
Cast aluminum
Remote Controls
Optional Remote PEQ
(overrides rear channel built-in Punch EQ)
Visual Indicators
Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Front Output -00dB to +2dB @ 11 steps (Blue LEDs)
Rear Output -00dB to +2dB @ 11 steps (Blue LEDs)
Circuit Topology Class
Class A/B
Frequency Response
20Hz to 20kHz +/-1dB
Dimensions (H x W x D)
2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm)
Dimensional Diagram

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

View Process



Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.